Всего 1675 сообщенийСтраницы: 1 2 3 4 5 6 7 8 9 10 [10+] [20+] [30+]

 
 Harald2014-07-30 15:37:21

800 x 1067, 1294 кБ
An other view on Facility 211, pylon 40
 
 Harald2014-07-30 15:31:35

800 x 1067, 1310 кБ
Facility 211, Pylon 40, a branch pylon in Sindelfingen, Germany
 
 Harald2014-07-28 18:15:25

800 x 600, 739 кБ
Interesting branch pylon near Ettlingen, Germany
 
 Harald2014-07-28 13:09:33

800 x 750, 1101 кБ
Branch pylon of Hilpertsau-Weisenbach powerline, where the line splits in the single-circuit powerline to Reichental and the double-circuit powerline to Au im Murgtal.
 
 Harald2014-07-28 04:27:17

683 x 592, 161 кБ
Track of Hilpertsau-Weisenbach powerline
 
 Harald2014-07-28 04:25:44

800 x 600, 45 кБ
At the 7th pylon Hilpertsau-Weisenbach powerline splits into two powerlines, which continue as ordinary lines. One circuit runs to Reichental, while the two other continue to Au im Murgtal. The first line is immediately after the branch a normal line, while the second one transforms at the span between the 7th and the 8th pylon into a standard power line.
 
 Harald2014-07-28 04:19:06

800 x 1200, 104 кБ
Strainer of Hilpertsau-Weisenbach powerline.
 
 Harald2014-07-28 04:15:55

800 x 1200, 76 кБ
Suspension tower of Hilpertsau-Weisenbach powerline. The line runs paralell to the 110 kV-line to Forbach pump storage power plant.
 
 Harald2014-07-28 04:10:51

800 x 1200, 159 кБ
Hilpertsau-Weisenbach powerline consists of 7 pylons: one termination tower at Hilpertsau substation, 2 strainers, 3 suspension towers and 1 branch pylon

Termination tower at Hilpertsau substation
 
 Harald2014-07-28 04:06:05

800 x 534, 17 кБ
A very interesting powerline is the 1.326 km long powerline from Hilpertsau to Weisenbach in Baden-Württemberg, Germany. It looks on the first view like a 20 kV-lline using triple conductors, but when you have a closer look at it, you can see that the spacers are insulators and each bundle contains a complete circuit!

Spacer of Hilpertsau-Weisenbach powerline
 
 Harald2014-07-24 02:38:20

800 x 534, 32 кБ
Powerlines entering Nagold substation
 
 Harald2014-07-24 02:35:55

800 x 534, 59 кБ
110 kV/20 kV-substation at Nagold, Germany
 
 Harald2014-07-23 02:40:12

800 x 600, 23 кБ
The mast of Thurnau transmitter with all guys. The black dots in the guys are the insulators, the red balls serve just for aircraft warning.
 
 Harald2014-07-23 02:34:17

800 x 534, 82 кБ
The guys of the first and second guy level of Thurnau transmitter are divided by insulators in conventional manner as the upmost guy screens it from high static charges during thunder storms. So close to their common anchor basement, there is no coil for grounding.
 
 Harald2014-07-23 02:28:09

800 x 534, 94 кБ
An other view of the guy anchor of the upmost guy level of Thurnau transmitter and the coil used to ground the guy
 
 Harald2014-07-23 02:22:48

800 x 1200, 153 кБ
The guy of the upmost level of Thurnau transmitter is divided by an insulator. However, there is still the possibility that the rest of the guy disturbs too much the radiation of the transmitter. In order to solve this problem, there are two ways:
1.) Dividing the guy by further insulators
2.) Grounding the guy with a coil with an inductivity chosen in a way that the disturbance by the guy is very small.

Way 1 has the disadvantage that especially at very tall masts at certain weather conditions high voltages at the guy sections may occur, requiring insulators designed for much higher voltages than that produced by the transmitter and voltage arresters bridging the insulators, which are expensive to maintain.

At Thurnau transmitter for the upmost guy level, way 2 was chosen. The coil for grounding the guy is situated close to the anchor basement.
 
 Harald2014-07-23 02:04:55

800 x 1200, 124 кБ
An other view on the base of the mast of Thurnau transmitter
 
 Harald2014-07-23 02:00:18

800 x 534, 73 кБ
Basement of the mast of Thurnau transmitter. One can see the huge insulator on which it stands and the feeder line used for feeding it with the radio power to be radiated. The coil in the line prevents too fast voltage rises, which can occur in case of a lightning strike and damage the transmitter.
 
 Harald2014-07-23 01:53:48

800 x 1200, 62 кБ
Close view up the mast of Thurnau transmitter. The guys of the first and second level are attached with insulators at the mast, while that of the upmost are not. The insulator for dividing one of the upmost guys is visible on the picture.
 
 Harald2014-07-23 01:48:02

800 x 1200, 48 кБ
Thurnau transmitter is a mediumwave transmitter working on 549 kHz with 100 kW south of Thurnau, a town in Northern Bavaria, Germany. It uses as antenna a 240 metres high guyed mast insulated against ground. The mast is electrically enlengthened as the guys of the upper level are connected directly toward the mast and divided by an intermediate insulator.
 
 Harald2014-07-18 03:06:46

800 x 1200, 73 кБ
Erection of a new powerline tower near Aldingen, Germany
 
 Harald2014-07-17 15:59:07

800 x 1200, 135 кБ
Close look at an anchor tower of the shielding wires over motorway A8 at Heusweiler
 
 Harald2014-07-17 15:55:24

800 x 534, 75 кБ
The shielding grid over motorway A8 at Heusweiler
 
 Harald2014-07-17 15:51:13

800 x 534, 60 кБ
Basement of the 50 metres mast of Heusweiler transmitter. Unfortunately the basement insulator is poorly visible through the fence.
 
 Harald2014-07-17 15:47:18

800 x 1200, 74 кБ
The 50 metres high mast of Heusweiler transmitter, used for broadcasting on 1179 kHz. It is insulated against ground.
 
 Harald2014-07-17 15:43:37

800 x 534, 39 кБ
Basement of the 120 metres mast of Heusweiler transmitter with the cage antenna
 
 Harald2014-07-17 15:40:51

800 x 1200, 83 кБ
The lower part of the 120 metres high mast of Heusweiler transmitter with the cage antenna
 
 Harald2014-07-17 15:36:46

800 x 1200, 61 кБ
A further view on the two 120 metres high masts.
 
 Harald2014-07-17 15:32:49

800 x 1200, 75 кБ
The two 120 metres of Heusweiler transmitter. The mast on the right is a mast radiator insulated against ground, the mast on the left is equipped with a cage antenna on the lower part similiar to the ARRT-antennas realized in Ukraine.
The wires of the cage antenna, which are triple conductors are fixed with insulators designed for 110 kV at the two upper rings, which are fixed at the mast. The lowest ring is the collector of the cage antenna and fixed with insulators at three steel poles.
 
 Harald2014-07-17 15:29:12

800 x 1200, 70 кБ
The two 120 metres of Heusweiler transmitter. The mast on the right is a mast radiator insulated against ground, the mast on the left is equipped with a cage antenna on the lower part similiar to the ARRT-antennas realized in Ukraine.
The wires of the cage antenna, which are triple conductors are fixed with insulators designed for 110 kV at the two upper rings, which are fixed at the mast. The lowest ring is the collector of the cage antenna and fixed with insulators at three steel poles. The wires in the foreground belong to the shielding grid of nearby motorway A8.



Ваше сообщение

(jpg, gif, png) Для вставки фото с io.ua вписывайте URL адрес страницы с ним (https://io.ua/№№№№№№)
URL адреса автоматически преобразовываются в гиперссылки.
Ссылка на видео YouTube вида https://youtu.be/11-ти_значный_код_видео преобразовывается в плеер YouTube 		Имя


Страницы: 1 2 3 4 5 6 7 8 9 10 [10+] [20+] [30+]